Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V4.1
2.
When operating the tool, use proper eye and hearing protection as well as
protective heavy work gloves and a dust mask if your work creates dust.
3.
Never point the tool towards yourself.
4.
Never force the tool. Excessive pressure could bend or break the tool,
resulting in damage to your work piece or serious personal injury.
5.
Contact with a 'live' wire will make exposed metal parts of the tool 'live'
and shock the operator.
6.
After making adjustments, make sure that any adjustment devices are
securely tightened.
7.
Remove adjusting keys and wrenches before turning the tool on. A wrench
or a key that is left attached to the tool increases the risk of personal injury.
8.
Always keep the air hose away from moving parts on the tool.
9.
Wear proper hand and eye protection when searching for a high-pressure
leak. Use wood or cardboard as a backstop instead of hands.
10. Do not fire the rivets into soft surfaces. The riveter was designed to be
used on solid metal surfaces only.
11. Rivets fired too close to the edge workpiece pose the risk of damaging the
workpiece, possibly breaking the workpiece and forcefully launch pieces
causing personal injury.
AIR TOOL PRECAUTIONS
1.
Inspect the tool's air hose for cracks, fraying or other faults before each
use. Discontinue use if the air hose is damaged or hissing is heard from
the air hose or connectors, while operating the tool. Replace the defective
component/air hose.
2.
Do not allow people, mobile equipment or vehicles to pass over the
unprotected air hose. Position the air hose away from high traffic areas, in
a reinforced conduit or place planks on both sides of the air hose to create
a protective trench.
Visit www.princessauto.com for more information
3/16 in. Air Hydraulic Riveter
8549768
5
Publicité
Table des Matières
