Rating Plate, Range Selection - Camille Bauer SINEAX TV829 Manuel

1.2 SINEAX TV829 Art.-no. 158 312

Rating plate, range selection

13 14 15
U/I +
U+ I
Output
Power 11
SINEAX TV829
8
Input
U + U + U
5 6
1.3 SINEAX TV829 Art.-no. 158 312:
Conductor cross sections
Max.: each 1 x 2.5 mm
each 1 x 4 mm
each 2 x 1.5 mm
each 2 x 2,5 mm
Min.: each 1x 0,5 mm
Stripping length of conductors or sleeve length: 8 mm
32 32
16
U
12
7 8
2
stranded wire with sleeve
2
solid
2
stranded wire with sleeve
2
solid
2
solid or stranded wire with sleeve
The high voltage isolators of the
SINEAX TV829 Series must be
installed only by qualified and
specially trained personnel authorized
by the operating company.
Be sure that there is sufficient spacing
or isolation from neighboring devices
and protection against electrical
shocks!
Do not connect the device to power
supply before it is professionally
installed.
Caution!
Do not change the measurement
range during operation! The ranges
are selected by turning an insulated
rotary coding switch on the device
front using a screw driver.