Safety Information - Camille Bauer SINEAX TV829 Manuel

Safety information

Warning!
Dangerous contact voltages!
The high voltage isolators of the SINEAX TV829 Series must be installed
only by qualified and specially trained personnel authorized by the
operating company. When installing the device, be sure to observe the
applicable regulations such as EC directives, national codes and
regulations, standards, etc. Do not connect the device to power supply
before it is professionally installed. Do not change the measurement
range during operation, commissioning, or disposal!
For applications with high working voltages, you should ensure there is
sufficient spacing or isolation from neighboring devices and protection
against electrical shocks.
Be sure to observe the national codes and regulations during
installation and selection of cables and lines.
A two-pole circuit breaker must be installed between device and mains
supply.
Be sure to take measures against electrostatic discharge (ESD)
when installing or adjusting the high voltage isolator.
29