Adjustments - Lamborghini Caloreclima ECO 8 Manuel D'installation Et D'entretien

ADJUSTMENTS

AIR ADJUSTMENTS (ECO 8-10-15-20)
The easily accessible micrometric screw device
(13) allows fine, stable, precise adjustment of de-
livery air. After loosening the crown (12) turn the
screw clockwise to reduce throttle valve aperture:
turn anticlockwise to increase it.
NOZZLE HOLDER ADJUSTMENT
The special shape of the draught tube and the
diffuser, the position of which is adjustable even
when the burner is working, allows optimisation
of combustion parameters right across the burner
flowrate range and even in critical working condi-
tions. Turn the screw (17) anticlockwise to bring
the nozzle holder forward and increase airflow
around the diffuser. Vice versa, turning the screw
anticlockwise reduces the amount of air passing
through.
PUMP PRESSURE ADJUSTMENT ECO 8-10-15-20
Pump pressure is calibrated at the factory at 12 Kg/cm2. However, should it be ne-
cessary, pressure can be adjusted by turning the screw (42). To check the obtained
pressure fit a pressure gauge on the pressure takeoff point (27).
PUMP PRESSURE ADJUSTMENT ECO 15/2 - ECO 20/2
Pump pressure is calibrated at the factory at 10 Kg/cm2 for the 1st stage and 18 Kg/
cm2 for the 2nd stage. However, should it be necessary, pressure can be adjusted by
turning the screw (61) for the 1st stage, and screw (42) for the 2nd stage. To check the
obtained pressure fit a pressure gauge on the pressure take-off point (27).
N.B.: With a scale range of up to 30 Kg/cm2 the working range of the pump is min 7 - max 14
Kg/cm2.\
UK
38