Connections - PRESONUS FaderPort 8 Mode D'emploi

Shift. Use these buttons to access the alternate controls called out where applicable.
Press and hold the buttons for momentary use. Press and release for latching use.
Channel Controls. Each channel is equipped with its own Select, Mute, and Solo
buttons. When Arm is active, the Select buttons will turn red and will arm the tracks
for recording. Solo and Mute Clear are also provided to quickly disable hidden solos
and mutes.
Studio One Custom Controls. These controls are provided exclusively for Studio
One use. For Mackie Control and HUI operation, these are user definable.
• Bypass. Bypasses plug-in on the selected channel. Use the Shift
button to bypass all plug-ins on the selected channel.
• Macro. Faders control the Channel Editor for the selected
channel. Use the Shift button to open the Channel Editor.
• Link. Pan/Param encoder follows whatever function your mouse is hovering over.
Use the Shift button to lock the current function to this encoder.

Connections

3.2
Power and Power Switch. This is the connection for your external
power supply. Use the button to turn your FaderPort 8 on or off.
Footswitch. Connect a momentary or latching footswitch to control start/stop.
USB. This is the USB device connection for your FaderPort 8.
Faderport 8 Quick Start Guide
5
English
Español
Deutsch
Français