Press The; Beep Tone On/Off; To Disable (Of) This Function - Topcom KIDZZZ PMR BABYTALKER 1010 Manuel D'utilisateur

17 Adjusting the Parent Unit Speaker Volume

18 Beep tone ON/OFF

The Baby Unit can transmit automatically a 1 khz beep tone every 30 seconds when it is in
the listening mode. This function can be used when you need to be sure that the babytalker
is operational at all time.
19 Automatic monitor ON/OFF
The Baby Unit can automatically open the microphone every 5 minutes and transmit the
room activity for 5 seconds.
20 Alert Tone ON/OFF
The Baby Unit will send out an alert tone when you activate the VOX function. After the alert
tone, it will transmit the detected voice signal.
•

Press the

- button
speaker volume. The volume level is displayed.
• Press the - button
• Press the - button
• Press the - button

to disable (OF) this function.

• Press the - button
• Press the - button
• Press the - button
to disable (OF) this function.
• Press the - button
• Press the - button
• Press the - button
to disable (OF) this function.
• Press the - button
19
in stand-by-mode to increase the
18
to decrease the speaker volume.
6
3 times.
8
to enable (ON) or the
6
to confirm the selection.
6
4 times.
8 to enable (ON) or the
6
to confirm the selection.
6
5 times.
8 to enable (ON) or the
6
to confirm the selection.
TOPCOM Babytalker 1010
4
- button
4
- button
4
- button
11