Scheduled Cleaning; Firmware Updates - Roborock S7 Manuel D'utilisation

Instructions

Scheduled Cleaning

Set cleaning schedules, and at the defined times, the robot will
clean and return to the dock.
No-Go Zones, No-Mop Zones, and
Invisible Walls
Use No-Go Zones, and Invisible Walls created in-app to prevent
access to certain areas and rooms. By default, No-Mop Zones will
activate when the VibraRise mop cloth mount is in place.
Invisible Walls
No-Go Zones
Note:
• Only in-app No-Go Zones and Invisible Walls are supported.
• Map Saving mode must be switched on, and a full clean completed before this function can
be used.
• No-Go Zones, No-Mop Zones, and Invisible Walls should only be used to customize the
cleaning area. They should not be used to isolate hazards.
• Moving the robot by hand or making significant changes to the environment may cause
the loss of No-Go Zones, No-Mop Zones, and Invisible Walls.
No-Mop Zones

Firmware Updates

Use the app to update the robot firmware. Update when the robot
is on the charging dock and has at least 20% battery power. The
power indicator will flash white quickly during the update.
More App Functions
View Robot Status
Real-Time Map View
Map Management
Customized Cleaning
Note: Actual app functions and details may differ slightly due to ongoing development and
upgrades.
026
Carpet Boost
Cleaning History
Maintenance Schedule
Adjust Volume