Add Device - Roborock S7 Manuel D'utilisation

Connect to the App
Reset WiFi
2
1. Open the upper cover and find the WiFi indicator.
2. Press and hold the and
"Resetting WiFi" voice alert. The reset is complete when the
WiFi indicator flashes slowly. The robot will then wait for a
connection.
Note: If you cannot connect to the robot due to your router configuration, a forgotten
password, or any other reason, reset the WiFi and add your robot as a new device.
buttons until you hear the
WiFi indicator light
• Off: WiFi disabled
• Flashing slowly: Waiting for
connection
• Flashing quickly: Connecting
• Steady: WiFi connected

Add device

3
On the app homepage, tap "+" in the top right corner and
follow the prompts to add a device.
Note:
• The actual process may vary due to ongoing app updates. Follow the instructions
provided in the app.
• Only 2.4GHz WiFi is supported.
• If the robot waits more than 1 hour for a connection, WiFi will be automatically disa-
bled. If you need to reconnect, reset the WiFi before proceeding.
022