Pride Mobility Victory XL 130 Manuel De L'utilisateur page 17

Masquer les pouces Voir aussi pour Victory XL 130:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Anti-Tip Wheels (If equipped)
The anti-tip wheels are an integral and important safety feature of your scooter. They are bolted to the frame at
the rear of the scooter.
PROHIBITED! Do not remove the anti-tip wheels or modify your scooter in any way that is not
authorized by your Provider.
WARNING! The anti-tip wheels may cause interference with the smooth transition of your scooter
when ascending or descending a curb. Contact your authorized Provider for more information.
Batteries
The batteries store electrical energy that powers your scooter. See
III. "Batteries and Charging" for information on how to charge
your scooter batteries.
Safety Flag Bracket (Optional — Models 613/713/713ES)
Accessory brackets for installing an optional safety fl ag are
mounted at the rear of the scooter. See fi gure 7.
To install the safety fl ag:
1. Remove the cap from the top of the bracket.
2. Insert the fl ag pole into the opening.
Main Circuit Breaker
When the voltage in the batteries becomes low or your scooter
is heavily strained because of excessive loads, the main circuit
breaker may trip to protect the motor and electronics from damage.
When the breaker trips, the entire electrical system shuts down. See
fi gure 8.
 Three types:
1. Reset lever fl ips down when the breaker trips.
2. Reset button pops out when the breaker trips.
3. Automatic reset type will reset itself after approximately
a minute or so.
 Allow a minute or so for the electronics to "rest."
 Push the reset lever up until you hear a click, or push in the
reset button to reset the breaker.
 If the breaker trips frequently, you may need to charge the
batteries more often or have your authorized Provider perform
a load test on the batteries.
 If the main circuit breaker trips repeatedly, see your authorized
Provider for service.
Full-size Scooter Series
I I . Y O U R S C O O T E R
IDENTIFICATION KEY
1.
LEVER STYLE
a. reset lever
b. manual shut-off button
2.
RESET BUTTON STYLE
3.
AUTOMATIC RESET STYLE
(MODELS 614 OR 714)
Figure 8. Main Circuit Breaker
17

Publicité

Table des Matières
loading

Table des Matières