Pride Mobility Victory XL 130 Manuel De L'utilisateur page 18

NOTE: If the scooter is placed in freewheel mode (manual
freewheel lever forward) while the key is in the "on"
position, the scooter will not run until the manual freewheel
lever is pushed backward and the key is turned to the "off "
position, then back to the "on" position.
SECUREMENT POINTS
Always secure the scooter in a forward-facing position in
the vehicle. Attach the four tie-down straps to the designated
securement points. See fi gures 9 and 10. Tighten the straps
to suffi ciently remove all slack. Never attach tie-downs to
adjustable, moving, or removable parts of the scooter such as
armrests, shrouds, and wheels. These items should be removed.
Position the anchor points for the rear tie-down straps directly
behind the rear securement points on the scooter. The front
tie-down straps should anchor to fl oor points that are spaced
wider than the scooter to provide increased lateral stability.
WARNING! Ensure scooters are properly
secured to the motor vehicle during transport.
Scooters that are not properly secured can
become a hazard to the user and to other
vehicle passengers in the event of a crash,
sudden stopping, or swerving, as the scooter
could tip or slide out of place.
Figure 10. Front Securement Points (Identified with black dots)
18
I I . Y O U R S C O O T E R
IDENTIFICATION KEY
1. 3-WHEEL MODELS
2. 4-WHEEL MODELS
IDENTIFICATION KEY
1. MODELS 613, 713, AND 713ES
2. MODELS 614 AND 714
Figure 9. Rear Securement Points (Identified
with black dots)
Full-size Scooter Series