Battery Removal; Product Specification - Amibot Prime Mode D'emploi

Battery Removal

1. Remove the screws on the battery cover with a screw driver.
2. Remove the battery cover.
3. Grasp the insulating tape at two sides of the battery and lift the battery.
4. Unplug the wire connector that links the battery and robot.
Only use the original battery of the product, otherwise, it may cause product damage.
Note:
Product specifications
Classification
Mechanical
Specifications
Electrical
Specifications
Cleaning
Specifications
Main Body Button Type
Note: Particular specifications are subjected to change without prior notice.
16
Item
Diameter
Height
Weight
Power Rating
Battery Specifications
Dust Bin Capacity
Charging Type
Cleaning Mode
Charging Time
Cleaning Time
Detail
340mm
85mm
3.4Kg
24V, 600 mAh
Ni-MH 2000mAH, 14.4V
0.5L
Auto Charging/ Manual Charging
One key to clean & Remote control selection
About 200~300 mins
90 minutes at maximum
Touch (LED display)