Starting Up/Standby/Sleeping/Power Off - Amibot Prime Mode D'emploi

Product Operation
2. Starting up/ Standby/ Sleeping/ Power off
A. Starting up
a. Turn on the power switch at the right side of the robot.
b. Press
Note: If robot is in sleeping mode, press
to wake up the robot from sleeping mode, then press
cleaning automatically.
B. Standby
Standby means robot be with power switch on, wait for the user's operation. It can be changed
to standby mode by below methods:
a. Turn on the robot when it is powered off.
b. During robot cleaning, press
c. During robot sleeping, press power switch on main body of ON/OFF button on remote
control.
C. Sleeping
In sleeping mode, the robot can only be waken up from
on remote control in order to save power. To turn robot into sleeping mode from standby mode:
a. Keep pressing
b. Robot will automatically enter sleeping mode if there is no command received for more than
15 minutes.
D. Power off
a. In standby mode, turn off the power switch at right side of the robot.
b. In sleeping mode, the robot will automatically power off if there is no operation within 15
minutes and if no scheduling set on the robot. (If robot already scheduled, robot will keep in
sleeping mode.)
10
on main body or ON/OFF on remote control to start cleaning.
on main body for 3 seconds.
on main body or ON/OFF on remote control
on main body or ON/OFF on remote control.
again, the robot will start
button on main body or ON/OFF