Led Display - Midea MPPB-14CRN7 Manuel D'utilisation

Operation

LED display

Shows the set temperature in °C or °F ("°F" no display)
and the Auto-timer settings. While on DRY and FAN modes,
it shows the room temperature.
Shows Error codes and protection code:
E1-Room temperature sensor error.
E2-Evaporator temperature sensor error.
E3-Condenser temperature sensor error (on some models).
E4-Display panel communication error.
P1-Bottom tray is full--Connect the drain hose and drain the
collected water away.If protection repeats,call for service.
Note: When one of the above malfunctions occurs, turn off
the unit, and check for any obstructions. Restart the unit, if
the malfunction is still present, turn off the unit and unplug
the power cord. Contact the manufacturer or its service
agents or a similar qualified person for service.
Operation Instructions
COOL operation
-Press the "MODE" button until the "COOL" indicator light comes on.
-Press the ADJUST buttons "+" or "-" to select your desired room
temperature. The temperature can be set within a range of
17°C~30°C/62°F~86°F(or 88°F).
-Press the "FAN SPEED" button to choose the fanspeed.
HEAT operation(cooling only models without)
-Press the "MODE" button until the "HEAT" indicator light comes on.
temperature. The temperature can be set within a range of
17°C~30°C/62°F~86°F(or 88°F).
-Press the "FAN SPEED" button to choose the fan speed. For some
models, the fan speed can not be adjusted under HEAT mode.
DRY operation
-Press the "MODE" button until the "DRY" indicator light comes on.
-Under this mode, you cannot select a fan speed or adjust the
temperature. The fan motor operates at LOW speed.
-Keep windows and doors closed for the best dehumidifying effect.
-Do not put the duct to window.
AUTO operation
-When you set the air conditioner in AUTO mode, it will automatically
select cooling, heating(cooling only models without), or fan only
operation depending on what temperature you have selected and
the room temperature.
-The air conditioner will control room temperature automatically round
the temperature point set by you.
-Under AUTO mode, you can not select the fan speed.
NOTE: Under AUTO mode, both the AUTO mode and the actual
operation mode indicator lights illuminate.
12
EN