Trevi XT 10A8 BT Mode D'emploi page 14

ENGLISH
TROUBLESHOOTING
If the Soundbar does not work properly, check this short list before taking it to a TREVI authorised
service centre.
In any case, do not try to repair the device, this will void the warranty. Only TREVI authorised service
centres are authorised to perform operations on this product.
No Sound:
- Check if MUTE function on AUX mode, or PAUSE function on USB or Bluetooth mode, are enabled.
- Check that the correct input has been selected.
- Check and adjust the volume of the Soundbar and the TV (or the device connected).
The unit does not turn on or turns off automatically:
- Check that you have properly connected the adapter jack.
Pairing problems with Bluetooth devices:
- If the audio quality is poor after pairing Bluetooth with an external device, bring the external device
closer to the tower or remove any obstructions between them.
- If the connection between the tower and the device does not occur, check that the coupling function
of the device is enabled; refer to the device manual to enable the function.
- If the coupling with the external device is activated and deactivated continuously, bring the external
device closer to the tower or remove any obstacle between them. In some external devices, the
Bluetooth pairing can be switched off automatically to safeguard the consumption of its battery, this
is not a malfunction of the device.
I can't find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing:
- Ensure that the unit is switched on.
- Ensure that the Bluetooth function is activated on your Bluetooth device.
The device does not react to any operation:
- Disconnect the power cable from the device for 30 seconds to reset it.
14
XT 10A8 BT