Remote Control; Power Supply; Basic Function - Trevi XT 10A8 BT Mode D'emploi

ENGLISH

REMOTE CONTROL

16
17
18
19
20
21
22
23

POWER SUPPLY

Plug the power cord into the socket (12) on the device and plug into a power outlet.

BASIC FUNCTION

POWER ON/OFF
Press the POWER ON/OFF switch (13) and turn it to the "I" position to switch the appliance on.
Press the POWER ON/OFF switch (13) and turn it to the "0" position to switch off the appliance.
STAND-BY
1. Press the button
2. Press the button
MODE FUNCTION
To change the operating mode, press the M button (7) on the unit or press the MODE button (24) on
remote control repeatedly.
VOLUME ADJUSTMENT
Turn the knob (8) on the unit or use the VOL + /VOL - buttons (25) on remote control to increase or de-
crease the volume of the appliance.
FM RADIO
AUTOMATIC SEARCH
1. Switch on the appliance and press M button (7) on the unit several times or press the MODE button (24)
on the remote control to select the RADIO function (the frequency indication will appear on the display);
2. Hold the button
control to start the automatic search of the stations (the radio starts searching for radio stations and
will automatically save them in the memory). The number of stored stations depends on the radio
signal in your area. The device can store up to 80 stations;
3. Press (3) or
to select the next or the previous radio channel.
- If the channel signal is not good, it can be fine tuned by pressing the
the remote control to adjust the signal.
Note: For a better sound quality, please make sure that the FM Antennahas been fully extended.
16.
29
17.
28
18. FOLDER button.
19. SEARCH button: automatic storage Radio stations.
27
20. Numbers button.
26
21. MUTE button.
22. EQ button.
23. REPEAT button.
24. MODE button: function selection.
25. VOL +/VOL - buttons.
25
26. TUN +/TUN - buttons.
27.
24
28.
29.
(16) on the remote control to turn ON the unit.
(16) on the remote control to turn OFF the unit.
(2) on the unit for a few seconds or press the SEARCH button (19) on remote
(6) button on the unit, or
button: Stand-by/ON.
/CH- button: previous track /channel.
/CH+ button: next track /channel.
button: Stop.
button: play/pause.
/CH- (17), /CH+
12
XT 10A8 BT
(27) buttons on remote control
TUN +/TUN - (26) button on