Setting of menu items
SETTING menu
[1] MODE
Note
When DIGITAL EXTENDER is set to
X, the resolution is downgraded.
The detail function ceases to work as
well.
CAM ID POSI [0 to 3]
For selecting where the camera ID is to be
displayed.
0: top left, 1: top right,
2: bottom left, 3: bottom right
MATRIX TABLE [OFF, A, B]
For selecting OFF, A or B as the matrix
setting.
COLOR CORRECTION [OFF, ON]
For turning the color correction function ON
or OFF.
DIGITAL EXTENDER [OFF, X2]
For digitally doubling the images when set to
X.
BAR SEL
[FULL (16:9), FULL (4:3), SMPTE (16:9),
SMPTE (4:3), ARIB]
For selecting the color bars.
Select the 4: color bars for down-conversion
at the system side. The color bars and
characters will then be contained within the
4: picture angle.
- 45 (E) -