Configuration Example : High-Speed P/T System () - Panasonic AK-HC1800G Mode D'emploi

How to set up the system
Configuration example 3: High-speed P/T system (2)
Set and check the communication protocol and video format prior to installation.
When mounting the camera on the AW-PH400 pan/tilt head and controlling it from the AW-CB400
remote operation panel, select "4" as the PROTOCOL setting of the AK-HC1800G.
When connecting it directly to and controlling it from the AW-CB400, select "" as the PROTOCOL setting.
Motor drive lens
ZOOM/FOCUS
10BASE-T straight
cable (Pan/tilt +
camera control)
AC adapter
AW-PS510A or
AW-PS505A
Pan/tilt control panel
AW-RP400
IRIS
Indoor
pan/tilt head
AW-PH400
HD SDI
Remote
operation panel
AW-CB400
- 15 (E) -
HD SDI
Camera connecting cable
AW-CA15H29G
AK-HC1800G
When mounting the camera
on the pan/tilt head:
Select "4" as the PROTOCOL
setting.
HD SDI
Monitor
AK-HC1800G
When connecting the camera
directly to the AW-CB400: Select
"3" as the PROTOCOL setting.
AC adapter
AW-PS510A or
AW-PS505A
Monitor
Motor drive lens