Introduction; Indications For Use - Sunoptic Surgical LED-3000 Manuel D'opération

1. INTRODUCTION

Congratulations on the purchase of your new LED-3000 Light Source!
This user-friendly LED light source is a high efficiency light source utilizing state-of-the-
art superior illumination technology. It offers a variety of features such as:

7000º K daylight brightness for good color definition

Quiet operation

Long life, 30,000 hrs.

Compact and light weight

Turret which adapts to various types of light guides

Pulse-width Modulation (PWM) Electrical Dimming
In short, you have chosen the best and we would like to make sure you receive the optimal
results with your new LED light source by using it correctly.
This Operator Manual will help you to install the device and optimally integrate it with other
components of your system. It will also instruct you how to operate the LED light source
and how to keep it clean. It will give you maintenance and service guidelines as well as
recommendations for best performance results.
1.1 INDICATIONS FOR USE: The LED light source is used to illuminate the site of
surgery during minimally invasive surgical procedures in arthroscopy (orthopedic
surgery), laparoscopy (general and gynecological surgery) and in Endoscopy
(general, gastroenterological and ENT surgery) The light is transmitted from the light
source through a fiber optic cable and a scope.
LIT195 SUNOPTIC SURGICAL
(English)
®
Rev. C
Date of Revision:9/15/15
Page 3 of 78