NSK Ti-Max Z45L Mode D'emploi page 23

Masquer les pouces Voir aussi pour Ti-Max Z45L:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

NOTICE
NSK recommends the use of "Spray Mist Absorber" (Y900084) to prevent oil mist expelling out of the handpiece head.
Chuck cleaning
Clean the Push Button chuck once a week.
1) Mount the Tip Nozzle into the spray can port.
2) Lubricate the chuck directly through the bur insertion hole (Fig. 10).
3) Lubricate handpiece by using NSK PANA SPRAY Plus / PANA SPRAY (Fig. 7) or NSK automatic handpiece
cleaning and lubrication system.
CAUTION
If the chuck is not regularly cleaned the chuck grip may be weakened and the bur may be accidentally released during use.
Bur Insertion Hole
Tip Nozzle
Fig. 10
21

Publicité

Table des Matières
loading

Table des Matières