Sleep Mode Of The Device; Setting Time And Date - Marque Verte Digitensio PRO Mode D'emploi

Attention!
• Please use «AAA» Long-Life or Alkaline 1.5V Batteries. Use of rechargeable batter-
ies (1.2V Accumulators) is not recommended.
• If your blood-pressure monitor is left unused for long periods, please remove the
batteries from the device.
Functional check: Press and hold the «M» button to test all the display elements. When
functioning correctly all segments appear.

4.2. Sleep mode of the device

The device is designed to stay at the sleep mode after batteries are inserted. In this
mode, the time and user icon will be displayed. You can conduct the following opera-
tions in this mode.
• Reading the set date: Press the «TIME» button. The date
set will be displayed for 2 seconds.
• Recalling measurements: Press the «MEMORY» button.
The measuring data stored can be displayed. For more infor-
mation refer to the section on Memory storage and recall.

4.3. Setting time and date

This blood-pressure monitor incorporates an integrated clock with date display. This has
the advantage, that at each measurement procedure, not only the blood-pressure values
are stored, but also the exact moment of the measurement. After new batteries have
been inserted, the device will request a user to set up time/date. (Example: Entering
2008-08-15 Time 09:30).
1. After new batteries have been inserted, the display
comes into direct year setting, during which the 4 char-
acters (2005) blink.
1
1
mmHg
mmHg
MR
2005
28