The Various Components Of The Blood-Pressure Monitor; Inserting The Batteries - Marque Verte Digitensio PRO Mode D'emploi

3. The various components of the blood-pressure monitor

LCD Display
Battery cover
The illustration shows the blood-pressure monitor BP 3BD1-4D, consisting of:
Wrist cuff fits wrist size 13.5–19.5 cm
4. Using your blood pressure monitor

4.1. Inserting the batteries

Insert batteries immediately after unpacking the unit. Battery compartment is located on
the left lower side of the device (see illustration).
a) Remove cover as illustrated:
b) Insert the batteries (2 x size 1.5V), observing the indicated polarity
c) If the battery warning
must be replaced by new ones. After battery warning
will not work until batteries have been replaced.
27
appears in the display, the batteries are empty and
«Time» button
MEMORY «M» button
«O/I» button
MAM selection switch
( 1 or 3 measuremnt)
Wrist cuff
appears, the device