Select The User - Marque Verte Digitensio PRO Mode D'emploi

2. Enter the correct year by pressing «MEMROY» button.
Each click will change the clock one year. Example: 3 x
press.
3. Press «TIME» button. The display now switches to the
current date, during which the first character (month)
blinks.
4. Enter the current month by pressing the «MEMORY»
button. Example: 7 x presses
5. Please follow the instructions above to set the day, hour
and minutes.
6. After all settings have been made, click the «TIME» but-
ton once. The date is briefly displayed and then the time.
The input is now confirmed and the clock begins to run.
Note
• If you want to change date and time, press and hold the time button down for
approx. 3 seconds till Year flashes, then you can enter the new values as described
above.
• 1 x press on «MEMORY» button or «TIME» button advances one operation.
• Holding the button down speeds up the procedure switches to the current date, dur-
ing which the first character (month) blinks.

4.4. Select the User

This blood pressure monitor is designed to store 30 measurements for each of two
users. Before taking a measurement, be certain that the correct user has been selected.
a) With the unit off, press and hold the «TIME» button for
3 seconds until the user icon in the lower left corner of
the LCD screen flashes.
29
2008
8
08-15
1
2