Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Snooze function:
When the alarm sounds and you use the
snooze function by pressing the foot or
the "SNOOZE" button, the alarm will stop
and the
icon appears in the display, and
flashes along with the alarm
alarm will sound again after 5 minutes.
Press the "SNOOZE" button or the foot
of the WS-1150 to activate the snooze
function again of press any other random
button to switch off the alarm.
Moon status:
The moon status indicates how much of
the moon is visible (when not cloudy). This
display depends on the date setting.
Indoor temperature:
The indoor temperature is measured every
12 seconds. The temperature curve icon
shows whether the temperature is increas-
ing, decreasing or remains stable as fol-
lows.
If the change in temperature is smaller than
1ºC within an hour,
If the change in temperature is higher than
1ºC within an hour,
If the change in temperature is lower than
1ºC within an hour,
This measurement has a range of 0ºC to
+50ºC ±1ºC
icon. The
will appear.
will appear.
will appear.
Indoor humidity:
The humidity is measured every 12 sec-
onds. The display indicates the percentage
of the humidity. The comfort icon indicates
how pleasant the indoor climate is.
When the humidity is lower than 40%:
When the indoor temperature is between
20°C~28°C and the humidity is between
40%~70%:
No icon is shown when the humidity is be-
tween 40%~70% is, but the indoor temper-
ature is outside of the range 20°C~28°C.
When the humidity is higher than 70%:
Memory:
You can press the "MEM" button to display
the measured minimum and maximum
value of the following items.
• indoor temperature
• Humidity
• outdoor temperature
1. press the "MEM" button.
2. when displaying the indoor tempera-
ture, humidity and outdoor tempera-
ture, the word "MAX" will appear. The
indicated value shows the measured
maximum value.
3. press the "MEM" button.
4. when displaying the indoor tempera-
ture, humidity and outdoor tempera-
ture, the word "MIN" will appear. The
indicated value shows the measured
minimum value.
5. press the "MEM" button or wait for
8 seconds to leave this mode.
30
Publicité
Table des Matières
