Setting Entry Points - Solo Robolinho 1000 Traduction Du Mode D'emploi D'origine

Program menu
In the week program, the days of the week and
the times are set when the Robolinho should mow
automatically.
In menu item 1 [All days], the Robolinho
mows at the set times every day.
The symbol [X] shows the currently ac-
tive day of the week.
[All days] menu item
1. Select the [All days] menu item with the corresponding [arrow key] (3-3) and confirm with the [mul-
tifunction key right] (3-5).
2. Press the [down arrow key] (3-3) until [Change] is active.
3. Select the required menu item with the corresponding [arrow key] (3-3) and confirm with the [multi-
function key right] (3-5).
Explanation of symbols
(1)
Menu item
(2)
Menu item
(3) [-]
[R]
Edge mowing
[M]
(4) Start time
(5) End time
(6)
[0 - 9]
Fixed entry point
[?]
Automatic entry point

SETTING ENTRY POINTS

(Robolinho 1000)
Main menu
Programs
Settings
Back Confirm
1. Use the [up arrow key] or the [down arrow key]
to select the [Programs] menu item until the
star symbol appears to the left of the menu
item.
2. Confirm with the [multifunction key right].
456403_a
In menu item 2 [Day of week], the Robolinho
mows at the set times on the set day of the
week.
1. Use the corresponding [arrow key] (3-3) to
select the required menu item and confirm
each one with the [multifunction key right].
Observe the mowing result and mow as
long as necessary in order to obtain a
well kept lawn.
All days (All days are changed.)
Day of week
Mowing window deactivated
The Robolinho mows on the right along the boundary
cable (1x). After mowing the edges, the Robolinho
continues mowing the marked-out area.
Normal mowing
The Robolinho departs from the base station at the
selected time for mowing.
The Robolinho moves back to the base station at the
selected time.
The Robolinho departs from the selected entry point at
the selected time for mowing.
The entry points are changed automatically (recom-
mended setting).
Calling up entry points
(Robolinho 1000)
Programs
Week program
Entry points
Back Confirm
1. Use the [up arrow key] or the [down arrow key]
to select the [Entry points] menu item until the
star symbol appears to the left of the menu
item.
2. Confirm with the [multifunction key right].
Entry points
Point X1 at
Point X2 at
Back Confirm
33