Precautions - Kenwood NX-5000 Série Guide De L'utilisateur

Observe the following precautions to prevent fire, personal injury, and transceiver
damage.
Do not attempt to configure the transceiver while driving; it is too dangerous.
●
Do not disassemble or modify the transceiver for any reason.
●
Do not expose the transceiver to long periods of direct sunlight, nor place it near heating appliances.
●
If an abnormal odor or smoke is detected coming from the transceiver, switch the transceiver power
●
off immediately, and contact your KENWOOD dealer.
Use of the transceiver while you are driving may be against traffic laws. Please check and observe the
●
vehicle regulations in your area.
Do not use options not specified by KENWOOD.
●
Do not put the plastic bag used for packing of this equipment on the place which reaches a small child's
●
hand. It will become a cause of suffocation if it wears flatly.
Do not place the transceiver on unstable surfaces.
●
Keep the volume as low as possible to protect your hearing.
●
Always switch the transceiver power off before installing optional accessories.
●
To dispose of batteries, be sure to comply with the laws and regulations in your country or region.
●
CAUTION
The transceiver operates in 12 V negative ground systems only! Check the battery polarity and
●
voltage of the vehicle before installing the transceiver.
Use only the supplied DC power cable or a KENWOOD optional DC power cable.
●
Do not cut and/or remove the fuse holder on the DC power cable.
●
Do not place the microphone cable around your neck while near machinery that may catch the
●
cable.
WARNING
For passenger safety, install the transceiver securely using the supplied mounting bracket and
●
screw set so the transceiver will not break loose in the event of a collision.
4

PRECAUTIONS