Safety Instructions; Symbols And Icons; Symbols On The Appliance - Grizzly ELS 3027 E Combi Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
Air speed ............................ max. 280 km/h
Air suction volume .............. max.14 m
Chopping rate .....................................15:1
Collection bag ....................................45 L
Protection class ..................................
Protection category............................ IPX0
Weight .................................. 2,7 kg / 3,7 kg
Sound pressure level
(L
) ..................... 88,7 dB (A), K
pA
Sound power level (L
guaranteed ............................103 dB(A)
measured ..... 100,6 dB(A); K
Vibration (a
)
h
handle ................. 2,35 m/s
auxiliary handle .....1,18 ,m/s
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
Technical and optical changes may be
undertaken in the course of further deve-
lopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning:
The vibration emission value may
diff er during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protec-
ting the user should be based on
estimated exposure under actual
/min
3
= 3 dB
pA
)
WA
=2,36 dB
WA
; K=1,5 m/s
2
; K= 1,5 m/s
2
usage conditions (all parts of the
operating cycle are to be conside-
red, including, for example, times
during which the power tool is tur-
II
ned off and times when the tool is
turned on but is running idle).

Safety instructions

This section describes the basic
safety rules when working with the
device.

Symbols and icons

2
2

Symbols on the appliance

Warning!
Read the manual.
Danger due to materials
blown out of machine!
Remove persons in the
vicinity from the danger area.
Caution.
Rotating impeller wheel.
Keep hands away.
Remove the power plug be-
fore maintenance and repair
work.
Remove the plug from the
mains. Immediately if the
cable is damaged or cut.
For saftey reasons, make
sure that the safety cover
over the suction opening is
securely mounted!
GB
67

Publicité

Table des Matières
loading

Table des Matières