Technical Data; Safety Instructions; Symbols And Icons - Grizzly ALS 4025 Lion Traduction De La Notice D'utilisation Originale

GB

Technical data

Appliance
Motor voltage ................................. 40 V
Idling speed n ................6000-13500 min
0
Runtime (suction) ..................max. 20 min*
Runtime (blowing) .................max. 26 min*
Blowing speed .....................max. 260 m
Suction speed ......................max. 400 m
Collection bag ....................................20 L
Mulch ratio ..........................................10:1
Protection class ......................................III
Weight (without battery charger) ........ 2,8 kg
Sound pressure level
(L ) ...................... 84,8 dB (A), K
pA
Sound power level (L
guaranteed ..............................96 dB(A)
measured ....... 94,3 dB(A); K
Vibration (a ) ........ 0,84 m/s
h
* The actual runtime under load of a fully char-
ged battery depends on how you work and on
the load put on the trimmer during operation.
Battery (Li-Ion) .......................... DYMA81
Nominal voltage (U
Capacity (C).....................................2.5 Ah
Energy (E) ...................................... 90 Wh
Battery cells ...........................................10
Charger 1 A / Quick charger 2 A
Voltage input .. 220-240 V~, 50 Hz, 0.6 A / 1 A
Voltage output .................... 40 V
Protection class ..................................
Protection category............................ IP20
Charging time ..............appr. 2.5 h / 1.25 h
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
62
=3 dB
pA
)
WA
=2,02 dB
WA
; K=1,5 m/s
2
) .................. 40 V
max
1 A / 2A
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
-1
The stated vibration emission value was
/h measured in accordance with a standard
3
/h testing procedure and may be used to com-
3
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
2
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool
is turned on but is running idle).

Safety instructions

This section describes the basic safety ru-
les when working with the device.
II

Symbols and icons

Symbols on the appliance
Warning!
Read through the operating
manual carefully before using the
device.