Removal Of Clogging And Blockage; Storage; Disposal And Protection Of The Environment - Grizzly ELS 3027 E Combi Traduction De La Notice D'utilisation Originale

GB
Removal of clogging and
blockage
Leaf material and fresh plant parts may
clog / block the device.
Cleaning the impeller wheel:
Pull out the mains plug!
There is a risk of injury!
1. Remove the protective cover (7) and/
or the suction tube (17).
2. Carefully remove residues or clogging
materials from the impeller wheel.
3. Check to make sure the impeller wheel
is easier to turn and is in undamaged
condition. Have our Service Centre
replace a defective impeller wheel.
4. Retighten the protective cover (7) and/
or the suction tube (17).
If the protective cover (7) and/
or the suction tube (17) is not
correctly screwed into place by
hand, it is not possible to operate
the device.

Storage

• For storage purposes you can remove
the blow tube (
tube ( 17) and the catcher (
from the motor housing (
corresponding installation instructions
in the „Start-up" section).
• Store the device in a dry place well out
of reach of children.
76
9) and/or the suction
14)
1) (see the
Disposal and protection
of the environment
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with
domestic waste.
• Hand over the device at an utilization
location. The plastic and metal parts
employed can be separated out and
thus recycled use can be implemented.
Ask our Service-Center for details.
• Defective units returned to us will be
disposed of for free.
• Throw the cut grass on the compost.
Do not throw it in the normal household
waste.