Technical Data; Safety Instructions; Symbols And Icons - Grizzly ALB 1815 Lion Notice D'utilisation Originale

GB
6 Handle
7 Battery
8 Battery charger
9 Release buttons
10 Battery charge state indicator

Technical data

Appliance
Motor voltage ..................18 V
Idling speed ...... max. 12000 min
Air speed ........................max. 200 km/h
Weight (without battery charger) .... 1.7 kg
Sound pressure level
(L ) ......................... 71 dB(A), K
pA
Sound power level (L
guaranteed .............................. 85 dB(A)
measured ............. 81.2 dB(A), K
Vibration (a ) ......... < 2.5 m/s
h
Battery (Li-Ion) .............................. AP-18
Nominal voltage .........................18 V
Capacity ...................................... 1.5 Ah
Charging time ...................... approx. 5 h
Recharger .................... JLH082100350G
Nominal consumption.................... 12 W
Uptake voltage / Input
.............................. 100-240 V~50/60 Hz
Voltage output / Output ..21 V
Protection class ..............................
Protection category ........................IPX0
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
40
1.5 Ah
(rpm)
-1
= 3 dB
pA
)
WA
=3 dB
WA
, K=1.5 m/s
2
350 mA
II
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
2
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool
is turned on but is running idle).

Safety instructions

Ensure that the safety instructions are ob-
served when operating the blower.

Symbols and icons

Symbols in the manual
Warning symbols with informa-
tion on damage and injury pre-
vention.
Instruction symbols (the instruc-
tion is explained at the place of the
exclamation mark) with information
on preventing damage.