General Specifications - Klein Tools CL900 Manuel D'utilisation

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

ENGLISH

Klein Tools CL900 is an auto-ranging, true root mean square (TRMS)

digital clamp meter that measures AC/DC current via the clamp and

measures AC/DC voltage, resistance, continuity, frequency, duty-

cycle, capacitance, and tests diodes via test-leads. It features a Low

Impedance (LoZ) mode for identifying and eliminating ghost or stray

voltages, and has a dedicated mode for capturing Inrush Current.

• Operating Altitude: 6562 ft. (2000m)

• Relative Humidity: <80% non-condensing

• Operating Temperature: 32° to 122°F (0° to 50°C)

• Storage Temperature: 14° to 140°F (-10° to 60°C)

• Accuracy: Values stated at 65° to 83°F (18° to 28°C)

• Temp Coefficient: 0.1 x (Quoted Accuracy) per °C above

28°C or below 18°C, corrections are required when ambient

working temp is outside of Accuracy Temp range

• Dimensions: 10.4" x 3.9" x 1.7" (265 x 99 x 43 mm)

• Weight: 18.6 oz. (526 g) including batteries

• Calibration: Accurate for one year

• Standards: Conforms to UL STD 61010-1, 61010-2-032,

• Pollution degree: 2

• Accuracy: ± (% of reading + # of least significant digits)

• Drop Protection: 6.6 ft. (2m)

• Safety Rating: CAT IV 600V, CAT III 1000V, Class 2,

CAT III: Measurement category III is applicable to test and

measuring circuits connected to the distribution part of the

building's low-voltage MAINS installation.

CAT IV: Measurement category IV is applicable to test and

measuring circuits connected at the source of the building's

low-voltage MAINS installation.

• Electromagnetic Environment: IEC EN 61326-1. This

equipment meets requirements for use in basic and controlled

electromagnetic environments like residential properties,

business premises, and light-industrial locations.

Specifications subject to change.