Operation; Operating Controls - Sennheiser evolution wireless Série ew 300 Notice D'emploi

6

Operation

Transmitters and receivers of the Sennheiser evolution wireless Series ew 300
have been factory-preset to allow immediate use after switch-on (
ring the devices for use"). Please note, however, that the transmitter sensitivity
is dependent on the application. To avoid overmodulation and distortion,
please first check whether the preset sensitivity is suitable for your particular
application (

Operating controls

Press the ON/OFF
ON/OFF
switch the transmitters and receivers on or off.
POWER
MUTE Use the MUTE
without switching off the transmitter.
SET Press the SET button
– to select a menu,
– to change to the next menu,
– to change to the next segment when entering a name,
– to return to the top menu level.
Press the UP button
– to adjust the setting of a menu,
– to change a single character when entering a name.
Press the DOWN
– to adjust the setting of a menu,
– to change a single character when entering a name.
"Adjusting the sensitivity").
button or the POWER
switch (transmitters only) to noiselessly mute the audio signal
button
button (EM 300 receiver only) to
"5 Prepa-
53