Section 4 − Installation; Important Information Regarding Ce Products (Sold Within The Eu); Serial Number And Rating Label Location; Specifications - Miller RAD-400EF Manuel Du Propriétaire

4-1. Important Information Regarding CE Products (Sold Within The EU)

A. Information On Electromagnetic Fields (EMF)
!
This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.
This equipment is built in accordance with EN 60974−1 and is intended to be used only in an occupational environment (where the general public
access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.
Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding
circuit may not be a major contributor to the EMF. See the Owner's Manuals for all components of the welding circuit for additional EMF exposure
information.
S
The EMF assessment on this equipment was conducted at 0.5 meter.
S
At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.
B. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.

4-2. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the feed roller guard. Use rating label to determine input power requirements
and/or rated output. For future reference, write serial number in space provided on back cover of this manual.

4-3. Specifications

Wire Feed
Model
Speed Range
RAD−400EF
20 To 400 ipm
(0.5 To 10 mpm)
RAD−400EFT
30 To 780 ipm
RAD−780EF
(0.7 To 19.8 mpm)
OM-256 907 Page 12
SECTION 4 − INSTALLATION
Wire Diameter Input Weld
Circuit Rating
Range
3/32 To 7/32 in.
1000 Amperes
(2.4 To 5.6 mm)
100% Duty Cycle
1/16 To 1/8 in.
1000 Amperes
(1.6 To 3.2 mm)
100% Duty Cycle
Rating
100 Volts
1/4 HP,
85 RPM
100 Volts
1/4 HP,
143 RPM
ce-emc 3 2011-09
Input
Type Of
Power
Input Power
Cord
24 in.
115 VDC
(0.61 m)
24 in.
115 VDC
(0.61 m)
Weight
33 lb
(15 kg)
33 lb
(15 kg)