Handle Installation - Honda EU65is Manuel De L'utilisateur

Handle Installation

Install the handle assembly on the generator upper frame using the
12 mm washers, spring washers and handle holder bolts.
TORQUE: 20 23 N·m (2.0 2.3 kgf·m , 14 17 lbf·ft) −
HANDLE HOLDER BOLT (2)
HANDLE
Operation must be checked after attaching the handle.
To extend handle:
Raise the handle to the horizontal position. The handle will click into
place when locked.
HANDLE
−
SPRING WASHER (2)
12 mm WASHER (2)
−
HANDLE LOCK LEVER
65