Changing Oil - Honda EU65is Manuel De L'utilisateur

1.

CHANGING OIL

Drain the oil while the engine is still warm to assure rapid and
complete draining.
1. Open the right maintenance cover and remove the oil drain hole
cover.
2. Remove the oil filler cap and oil drain plug to drain the oil.
3. Install the oil drain plug, and tighten it securely.
4. Refill with the recommended oil (see page
5. Reinstall the oil drain hole cover and close the right maintenance
cover.
ENGINE OIL CAPACITY:
OIL DRAIN HOLE COVER
Wash your hands with soap and water after handling used oil.
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or
pour it on the ground.
1.1 L (1.2 US qt, 1.0 lmp qt)
OIL FILLER CAP
23 ) and check the oil level.
OIL DRAIN PLUG
41