Comelit AHDVR040 Serie Guide Rapide page 33

Select "network setup" from "system setup" menu.
DHCP：select DHCP to get IP automatically. "☑"means works ；"□" means non-work.
ESee： after connecting internet , click"☑ Esee" and save the setting, user will get an Esee ID. You can
remote DVR with this ID by
server.
IP address： the IP address must be unique and cannot be in conflict with the host or work station
the same network segment.
Subnet Mask：use for distinguish the network segment.
Gateway：need to set the gateway address to achieve communication between the different network
segments.
MAC address：device's MAC address
Web port：this port number is used for IE browser visit; default port is "80".
Preferred DNS：preferred DND IP address.
DDNS: The automatic analytic function of dynamic domain name, it could supported Comelit DNS, etc. To
use Comelit DNS see the last page of this manual.
In the "network setup" menu, click " DDNS " to enter it's setup interface
Enable："☑"means DDNS service start using ;"□"means stop using.
Select the corresponding network server and input user name, password and domain name
Select "PPPOE" from "network setup" menu..
Enable："☑ PPPOE Function" means to start up dial-up by PPPOE protocol, "□" means stop it.
Username：input the user name of ISP into edit box
Password：input the password of ISP into edit box
After the page setup is completed, click '"OK " to save the changes and exit ; click "cancel ", to exit the setting.
Network setup
www.dvrskype.com. It's free DDNS, no need to apply the domain name from any
32
which on