Publicité
Les langues disponibles
Les langues disponibles
Turn ON / OFF
Confirm that AC voltage accessible matches with DVR. Ensure that the DVR power outlet connect with a good
middle ground grounding. After switching power, the device started, 【POWER】 light is on. Turn into system,
if the panel status light flashing, it's normal conditions.
After device start, preview interface can be seen immediately. In the preview interface you can see the system
date, time, channel name.
Note: Default password is empty, click "enter" can into menu directly.
Main Menu Introduction
Press MENU key or right mouse, it will pop-up the main menu. Main menu consists of the following
components:
Split screen: select the corresponding preview mode.
Shortcut menu: System setup, Video playback, Video backup, Color adjust, Channel mode, PTZ control,
Manual record, Volume, Setup wizard and Exit System.
Channel mode
In the shortcut menu, choose "Channel mode". In this menu you can, using the scroll bar [1], select the mode of
the channels that will be connected to the DVR (AHD cameras, Analog cameras, IP cameras Easy series). To
automatically add IP cameras Easy series, then click the button "Add IP Camera" [2].
30
Publicité
