SERVICING
Regular maintenance is essential for good stove operation.
DAILY CLEANING
Clean with a vacuum cleaner. The whole process only takes a few minutes a day. Use a VACUUM CLEANER, preferably our
optional ash vacuum bin, when the stove is cold:
Remove top ceramic tiles and operate smoke duct cleaning rods repeatedly.
Open cover.
Brush internal parts of firebox, preferably using a soft brush.
Complete firebox cleaning also entails removing and putting the upper parts back, as illustrated below.
Vacuum-clean hearth and vacuum-clean the space around the combustion chamber where the ash falls Remove com-
bustion chamber, clean it with a scraper and unblock any blocked holes on all sides Remove and empty ash pan, and
vacuum-clean the underlying compartment.
Vacuum-clean combustion chamber compartment, clean touching edges and replace combustion chamber.
If necessary clean glass (when cold).
NEVER VACUUM-CLEAN HOT ASH
Do not loosen the Allen screws inside the firebox.
Make sure the two baffles are put
back in their right places.
- 32
-