Switching Off - EdilKamin ITALIANA CAMINI IDROTECH Installation, Usage Et Maintenance

Switching off

Hold the 0/1 key down for two seconds while the stove is operating. The shutdown starts and the word Off appears on the display
(for 10 minutes).
During shutdown:
• Pellet loading ceases.
• Ventilation turns up to maximum.
• The water circulates.
Never unplug the stove while it is shutting down.
CLOCK SETTING (DATE AND TIME)
Press the Menu key for two seconds to access the Prog. Use the + or – keys to read the Set. Press Menu. Set the date and time
displayed by pressing the + and – keys.
Press Menu and 'day' will appear on the display (the day of the week from 1 to 7). Set this with the + and – keys and confirm by
pressing Menu.
Press on/off for a few seconds to exit.
TIMER SETTING FOR EACH DAY OF THE WEEK
The weekly timer setting is in-built in the panel.
Three programs are available to set the ignition time:
Pr01 : the desired time for ignition and shut down must be set
Pr02 : the desired time for ignition and shut down must be set
Pr03 : the desired time for ignition and shut down must be set
For each day of the week (day 1=Monday; day 2=Tuesday...day 7=Sunday) more than one of the three programs available can be set.
ACTIVATING THE TIMER SETTING
Press the Menu key for two seconds to access the Prog. Press Menu. 'Pr On' will appear on the display. Press Menu. 'On' or 'Off'
will appear on the display. It is set to 'On' with the + or – keys. Confirm by pressing Menu. (Prog will be displayed). Press on/off
to exit the program.
SETTING A PROGRAM (e.g. Pr01)
Press the Menu key for two seconds to access the Prog. Press Menu. 'Pr On' will appear on the display. Press + or – to go to Pr1.
Press Menu. 'On P1' appears on the display with the time which is to be set (this is the time it is to go on). Confirm by pressing
Menu and adjust 'Off P1' (this is the time it is to shut down).
By pressing Menu 'offd1' will appear on the display (i.e. Pr 01 is not activated for day 1, Monday). Press the + key to activate it
and 'Ond1' will appear on the display, i.e. the ignition and shut down settings of program 1 are activated for Monday.
Press Menu to move on to the next day, Tuesday, and so on up to day 7.
Press on/off to exit.
The above steps are to be followed to set the time for ignition and shut down for Pr 02 and Pr 03 and to select which days are to be
set on or off for Pr 02 and Pr 03.
- 31
-