Maintenance And Cleaning; Disposal; Specifications; Wireless Camera - Conrad V2 Notice D'emploi

19. Maintenance and cleaning

Before cleaning the outside of the surveillance camera or the receiver, separate the
devices from the mains supply and pull the wall power supplies out of the mains
socket.
A clean, dry and soft cloth is sufficient to clean the outside of the camera and the
receiver.
Clean the camera lens very carefully, you may otherwise scratch it.

20. Disposal

Electric and electronic products do not belong in the household
waste.
At the end of its service life, dispose of the product according to
the relevant statutory regulations.

21. Specifications

a) Wireless camera
Operating voltage:
Frequency:
Operating temperature:
Resolution:
Minimum brightness:
Radio range:
Weight:
Dimensions (H x W x D):
5 V/DC via wall power supply or built-in
3.7V 1100 mAh LiPo rechargeable battery
2.4 GHz
-10° to +50°
640 x 480 (VGA) / 320 x 240 (QVGA),
QVGA = zoom mode active
1-8 lux
up to 200 m (free field)
approx. 100 g
approx. 114 x 60 x 19 mm
47