Conrad V2 Notice D'emploi page 46

Problem
Camera image is
motionless, seems is low.
frozen or is not
displayed at all.
Overexposed
camera image
sunlight.
Resolution does
not fit on the
screen or display
is black & white.
Display is
motionless, seems
frozen and the
buttons on the
receiver/monitor
have no function.
46
Possible cause
The camera battery
The camera is out
of range.
Brightness is set too high. Make sure that the camera is not
Direct light source
present.
Wrong display format
selected.
System error
Recommendation
Recharge the camera battery.
Try to adjust the aerial positions on the
wireless camera and the receiver/
monitor. Position the camera and the
receiver/monitor closer to each other.
Test different places of installation.
exposed to direct light sources or
Reduce the brightness.
See chapter "15. Setting brightness,
display format, power save mode"
See chapter:
„15. Setting brightness, display format,
power save mode"
Carry out a RESET.
See chapter: „16. Restore factory
settings (RESET)"