Setting The Volume - Conrad V2 Notice D'emploi

To deactivate automatic switching, select the "OFF" option. To display all four
channels simultaneously, select the "QUAD" option.
• Press "OK" on the multi-function button (14) of your receiver to accept the set-
tings.
Automatic switching of camera channels is deactivated by pressing the came-
ra channel selection button
Quad display is deactivated by pressing the "Up"
or "Right" section of the multi-function but-
ton (14).
Use menu items "Camera1 ON/OFF", "Camera2 ON/OFF",
"Camera3 ON/OFF" and "Camera4 ON/OFF" to activate (=Opti-
on ON) or deactivate (=Option OFF) camera channels. If a came-
ra channel is deactivated, it will neither be displayed during
automatic switching nor when a channel is manually selected
by pressing the

14. Setting the volume

The volume can be increased or decreased by pressing the "Left"
section of the multi-function button (14).
To exit the settings menu, press "OK" on the multi-function button (14) or wait for
approx. 20 seconds (the settings menu is exited automatically).
42
(15).
button (15).
, "Left" , "Down"
or the "Right"
,