Setting Brightness, Display Format, Power Save Mode - Conrad V2 Notice D'emploi

15. Setting brightness, display format,
power save mode
The following settings can be made in the "System Setup" menu:
Brightness: 0-15
TV out: PAL/NTSC
Power Save: Auto/OFF
You can set the brightness between 0 (=dark) to 15
(=very bright).
You can set the required display format.
You can activate power save mode (=Auto)
or deactivate (=OFF) it. The display switches off
automatically after approx. 2 minutes when power
save mode is active. Press any button to reactivate
the display. This mode is only available when
the receiver is powered by the built-in rechargeable
battery.
• Press "OK" on the multi-function but-
ton (14) of your receiver. The set-
tings menu opens up.
• Press the "Up"
section of the multi-function button
(14) to select menu item "System
Setup".
• Press "OK" on the multi-function but-
ton (14) to open up the "System
Setup" menu.
or "Down"
43