Set The Temperature - Singer SteamLogic Plus Manuel D'instructions

1. This appliance is designed to use normal tap water. Use of other liquids may damage
the appliance.
2. Plug in the appliance to an appropriate electrical outlet.
3. Start ironing when icons on the display panel stop blinking. This indicates the selected
temperature has been reached and the iron is ready for use.
4. Always unplug the appliance after use.
FILL THE WATER TANK
1. Unplug the Power Cord from electrical outlet.
2. Move Steam Selector to the
3. Open Water Tank Door and fill Water Tank with
water (to Max level).
4. Close the Water Tank Door.
5. Plug in Power Cord to electrical outlet and press
the Temperature Set Button to switch on the
appliance.
IMPORTANT: Never add fabric conditioner, starches or
any other chemicals to water in your iron. Ensure your iron is switched off and unplugged
from electrical outlet before filling.

SET THE TEMPERATURE

The appliance has different temperature settings to handle different fabrics. Press the
Temperature Set Button to switch the appliance on. The appliance will start at "Low (
If you want to switch to another ironing temperature, press the Temperature Set Button
and the Control Panel will cycle through the sequence, from "Low (
"High ( )" to "MAX", then back to "Low (
•••
Using Your SteamLogic Plus
Steam Iron
position.
)" as follows:
•
•
)" to "Medium ( )" to
• ••
ENGLISH – 5
)".