Cleaning & Maintenance - Singer SteamLogic Plus Manuel D'instructions

CLEANING & MAINTENANCE
1. Disconnect the Power Cord from electrical outlet.
2. Use a damp cloth or non-abrasive cleaner to remove deposits from the soleplate.
3. Never use sharp or rough objects to scrape deposits from the soleplate.
4. Never use abrasives, vinegar or descaling agents to clean the iron.
HELPFUL IRONING TIPS
1. Sort out articles to be ironed according to the type of fabric. This will minimize the
frequency of temperature adjustment for different garments.
2. If you start ironing at a high temperature and then select a lower one, the soleplate
may take more than 2 minutes to cool down. To speed up the cooling process, press
the steam trigger.
3. Test by ironing a small, inconspicuous part of the garment if you are unsure about
the fabric type. Start with a low temperature and increase gradually.
4. Wait for 2 minutes when changing temperature settings. Temperature adjustment
needs time to reach the required heat level, whether it is higher or lower.
5. Delicate fabrics such as silk, wool, velour, etc. are best ironed with an ironing cloth to
prevent shine marks.
10 – ENGLISH
Using Your SteamLogic Plus
Steam Iron