4/ Parameters Setting; Control Panel; Configuration - Pool Technologie Redox Manuel Utilisateur

CONNECTIONS TO THE CONTROLLER BOX
6

4/ PARAMETERS SETTING

CONTROL PANEL

1
Keys for the setting menu
Press 3 s on : On / Off
Press 3 s on : access to the
setting menu
To reach the setting menu : press 3 s on
➢ Select the function code using
The value flashes.
➢ Select the desired value using
The value freezes and the device returns to the previous menu.

CONFIGURATION

2
Model Uno – Redox regulation menu
Forced march of the salt chlorinator (by default 24 h)
Allows forcing the salt chlorinator supply and then its production for a while
MA
fixed.
During the forced march, the resting time is shown on the screen (in hour).
Calibrate the redox probe.
Ad
Allows calibrating the measure of the redox probe by entering a measured
value from the external plan (unification of the displays if several measure
devices are on). If the measure is not right, the calibration is rejected (display Er
; defective probe or out of order). In any case, do not replace a calibration.
Adjust the redox regulation instruction (670 mV by default).
SE
Allows setting the redox value to maintain in the swimming pool (in mV).
Maintenance / Diagnostic of the failures parameters :
Calibrate the redox probe : maxi distance +/- 100 mV (see § 6.2, p.27)
CA
JUSTREGUL UNO - JUSTREGUL DUO - PAPI004083-MULTI1 - FR/EN/ES/DE - Rev.01.19
Filtration Ph probe
box set Duo model
V
Redox probe
Uno model Chlorinator
Control pad
.
V
then confirm by .
then confirm by .
V
Salt
supply
pH probe indicator
running
Salt chlorinator
indicator running
From 1 h to 24 h
+/- 100 mV
compared to the
displayed value
From 550 to 750 mV
23