Controller Box - Pool Technologie Redox Manuel Utilisateur

3/ INSTALLATION
Before proceeding with installation of the device, it is very important to check the following points :
✓ The installation area should be dry and properly ventilated, protected from rain, (maximal ambient
temperature of use : 35°C) splashes, water spray, and UV radiation. Ensure that the pH corrector
product container is kept in a place sufficiently remote from any electrical equipment and any other
chemical product. Failure to comply with this instruction will lead to abnormal oxidation of the metallic
parts which could result in complete breakdown of the device.
✓ The assembly of the devices (according to the model) must be performed strictly in compliance with
the following layout diagram.
Uno model

CONTROLLER BOX

1
✓ Choose a location that is easily accessible, close to the pump timer, far apart 2 meters maximum
from the chlorinator cell. Install the controller box vertically, far enough away from the pool to
comply with the regulatory distance in force in your country. Do not cover.
✓ Controller must be permanently connected to the pump timer by enslaving to the pump timer. Do
not use an extension cord. Do not plug the device into an electric power outlet. Beforehand, turn
off the differential circuit breaker. Ensure that the controller box well switches off when the
filtration pump stops.
Any contact between the controller box and the water can pull a risk of electrocution.
JUSTREGUL UNO - JUSTREGUL DUO - PAPI004083-MULTI1 - FR/EN/ES/DE - Rev.01.19
20