Sony VPL-CH375 Guide De Référence Rapide page 48

Adjusting the tilt of the projector by lens shift
You can adjust the position of the projected image by turning the screws for lens shift
(V shift screw and H shift screw).
1 Lift up the lower end of the lens shift cover with your finger to remove it.
2 Insert a Philips screwdriver to the 1H shift screw inside the unit and turn it to adjust right or
left, and to the 2V shift screw to adjust up or down. Be careful not to look into the
lens.Continued turning of these screws will return the lens shift to its original position. Adjust
the screws to set the lens shift to the optimum position. For details on the adjustment range, see
the "Lens shift range"
18
GB
Projecting an Image
Lens shift cover
2 V shift screw
1 H shift screw