Throttle Friction Adjuster - Yamaha VF90 Manuel De L'utilisateur

35˚
2
3
1. Free accelerator button
2. Fully closed
3. Fully open
2
3
1. Free accelerator button
2. Fully closed
3. Fully open
TIP:
 The free accelerator button can only be
pushed when the remote control lever is in
the neutral position.
 After the button is pushed, the throttle be-
gins to open after the remote control lever
is moved at least 35°.
 After using the free accelerator, return the
remote control lever to the neutral position.
The free accelerator button will return auto-
matically to its set position. The remote
control will then engage forward and re-
verse normally.
N
1
ZMU07028
N
1
ZMU06903
EMU40606

Throttle friction adjuster

The throttle friction adjuster can be used to
adjust the resistance to movement of the re-
mote control lever, and can be set according
to operator preference. Adjust the throttle
friction according to the following procedure.
1. Remove the cap.
1
1. Cap
1
1. Cap
2. To increase resistance, turn the adjuster
clockwise. To decrease resistance, turn
the adjuster
WARNING! Do not overtighten the fric-
tion adjuster. If there is too much re-
sistance, it could be difficult to move
the remote control lever, which could
result in an accident.
Components
ZMU07025
ZMU06904
counterclockwise.
[EWM02581]
27