Microsoft Xbox 360 Mode D'emploi page 10

    c onnectYourracingWheel
Up to four racing wheels can be actively
connected to a console at one time. Each
connected racing wheel gets a quadrant on
the Ring of Light. Before you can connect
a racing wheel, at least one quadrant must
be free (unlit). To disconnect a racing wheel,
press and hold the Xbox Guide button for
three seconds, and then turn it off.
To connect your racing wheel to your console:
    1   Press and hold down the Xbox Guide
button or the Start button until the racing
wheel turns on.
       If your console is not on, press the power
button to turn on the console.
  
    3   Press and release the connect button on
the console.
    4   Press and release the connect button on
the racing wheel.
    5   After the Ring of Light (on the console and
on the racing wheel) spins and fl ashes
once, the racing wheel is connected. The
quadrant that remains lit indicates the
racing wheel's position.
10