Microsoft Xbox 360 Mode D'emploi page 9

Insert batteries according to the instructions
provided below.
If you use your racing wheel with an Xbox 360
Rechargeable Battery Pack, see the manual
that came with the battery pack for important
safety information about the use of the
battery pack.
To insert batteries into the racing wheel AA
battery pack:
    1   Remove the battery cover from the base of
the racing wheel.
       Press the tab on the top of the AA battery
pack and pull down to detach it from the
racing wheel.
    3   Insert two new AA (LR6) batteries with
their positive (+) and negative (–) ends
positioned as shown on the underside of
the battery pack. For best performance,
AA rechargeable batteries are not
recommended.
    4   Slide the AA battery pack back into place
on the controller and push in to lock.
    5   Replace the battery cover.
n OTE
To avoid pinching your fi ngers when inserting,
push only on the fl at surface of the battery
pack.
  9  
    removeBatteriesaboardaircraft removeBatteriesaboardaircraft
Before packing the racing wheel in Before packing the racing wheel in
luggage that will be checked on an luggage that will be checked on an
aircraft, remove any batteries from the aircraft, remove any batteries from the
racing wheel. The racing wheel can racing wheel. The racing wheel can
transmit radio frequency (RF) energy, transmit radio frequency (RF) energy,
much like a cellular telephone, whenever much like a cellular telephone, whenever
batteries are installed. batteries are installed.
n OTES
• The racing wheel uses only the AA battery
pack with AA disposable batteries (sold
separately) or, alternately, the Xbox 360
Rechargeable Battery Pack (sold separately).
• If you use batteries instead of the power
supply, force feedback will not be active.
• If you're using the Xbox 360 Rechargeable
Battery Pack, the racing wheel will charge
your battery pack whenever the battery
pack and the AC power supply are both
connected. Charging will not interfere with
force feedback.